ABB ACS880-x04, Firmware Manual, Page: 395 / 604

Parameters 395
90.52 Load speed filter
time Defines a filter time for load speed feedback ( 90.03 Load
speed ).
4 ms
0 … 10000 ms Load speed filter time. -
90.53 Load gear
numerator Parameters 90.53 and 90.54 define a gear function between
the load (ie. driven equipment) speed and the encoder
feedback selected by parameter
90.51 Load feedback
selection . The gear can be used to correct a difference
between the load and encoder speeds for example if the
encoder is not mounted directly on the rotated machinery.
See also section Load and motor feedback (page 50 ).
Note: This parameter cannot be changed while the drive is
running.
1
-2147483648 …
2147483647 Load gear numerator. -
90.54 Load gear
denominator See parameter 90.53 Load gear numerator .
Note: This parameter cannot be changed while the drive is
running.
1
-2147483648 …
2147483647 Load gear denominator. -
90.55 Load feedback fault Selects how the drive reacts to loss of load feedback. Fault
Fault Drive trips on a 73A1 Load position feedback fault. 0
Warning Drive generates an A798 Encoder option comm loss or A7B1
Load speed feedback warning and continues operation using
estimated feedbacks.
1
90.56 Load position offset Defines a load-side position offset. The resolution is
determined by parameter
90.57 Load position resolution .
0 rev
-2147483648 …
2147483647 rev Load-side position offset. -
90.57 Load position
resolution Defines how many bits are used for load position count within
one revolution. For example, with the setting of 16, the
position value is multiplied by 65536 for display in parameter
90.04 Load position .
16
0…31 Load position resolution. -
90.58 Pos counter init
value int Defines an initial position (or distance) for the position counter
(as an integer value) when parameter
90.59 Pos counter init
value int source is set to Pos counter init value int .
See also section Position counter (page 51 ).
0
-2147483648 …
2147483647 Initial integer value for position counter. -
90.59 Pos counter init
value int source Selects the source of the initial position integer value. When
the source selected by
90.67 Pos counter init cmd source
activates, the value selected in this parameter is assumed to
be the position of the load.
Pos counter
init value int
Zero 0. 0
Pos counter init
value int Parameter 90.58 Pos counter init value int . 1
Other Source selection (see Terms and abbreviations on page 114 ). -
No. Name/Value Description Def / FbEq16
90.53 Load gear numerator
90.54 Load gear denominator
Load speed
Encoder speed
=