422 Parameters
Enables the saving and restoring of up to four custom sets of
parameter settings. See section
(page
The set that was in use before powering down the drive is in
use after the next power-up.
Notes:
• Hardware configuration settings such as I/O extension
module, fieldbus and encoder configuration parameters
(groups 14…16, 51…56, 58 and 92…93, and parameters
), and forced input/output values (such as
) are not included in user parameter sets.
• Parameter changes made after loading a set are not
automatically stored – they must be saved using this
parameter.
• If no sets have been saved, attempting to load a set will
create all sets from the currently active parameter settings.
• Switching between sets is only possible with the drive
stopped.
No action
Load or save operation complete; normal operation.
0
User set I/O mode
Load user parameter set using parameters
and
1
Load set 1
Load user parameter set 1.
2
Load set 2
Load user parameter set 2.
3
Load set 3
Load user parameter set 3.
4
Load set 4
Load user parameter set 4.
5
Save to set 1
Save user parameter set 1.
18
Save to set 2
Save user parameter set 2.
19
Save to set 3
Save user parameter set 3.
20
Save to set 4
Save user parameter set 4.
21
is set to
, selects the user parameter set together with
parameter
as follows:
Not selected
0.
0
Selected
1.
1
DI1
Digital input DI1 (
, bit 0).
2
DI2
Digital input DI2 (
, bit 1).
3
DI3
Digital input DI3 (
, bit 2).
4
DI4
Digital input DI4 (
, bit 3).
5
DI5
Digital input DI5 (
, bit 4).
6
No.
Name/Value
Description
Def
/
FbEq16
Status of source
defined by par.
Status of source
defined by par.
User parameter
set selected
0
0
Set 1
1
0
Set 2
0
1
Set 3
1
1
Set 4
Summary of Contents for ACS880-x04
