116 Parameters
Settings for the internal brake chopper.
Configuration of mechanical brake control.
Settings for the energy saving calculators.
46 Monitoring/scaling settings
Speed supervision settings; actual signal filtering; general scaling
settings.
Communication settings for the control panel port on the drive.
Fieldbus communication configuration.
Fieldbus adapter A configuration.
Selection of data to be transferred from drive to fieldbus controller
through fieldbus adapter A.
Selection of data to be transferred from fieldbus controller to drive
through fieldbus adapter A.
Fieldbus adapter B configuration.
Selection of data to be transferred from drive to fieldbus controller
through fieldbus adapter B.
Selection of data to be transferred from fieldbus controller to drive
through fieldbus adapter B.
Configuration of the embedded fieldbus (EFB) interface.
DDCS communication configuration.
Defines the data sent to the DDCS link.
Mapping of data received through the DDCS link.
Motor and load feedback configuration.
Configuration of encoder interface modules.
Control of the supply unit of the drive, such as DC voltage and
reactive power reference.
Various hardware-related settings.
Motor values supplied by the user that are used in the motor
model.
206 I/O bus configuration
207 I/O bus service
208 I/O bus diagnostics
209 I/O bus fan identification
Group
Contents
Page
Summary of Contents for ACS880-x04
