Parameters 381
LSU CW
Control word for the supply unit.
22
DC voltage
reference
(page
24084
Reactive power
reference
(page
24094
Source selection (see
). -
Preselects the data to be sent as word 2 of data set 10 to the
other converter.
See also parameter
INU-LSU data set 10 data 2 value
.
For the selections, see parameter
.
Preselects the data to be sent as word 3 of data set 10 to the
other converter.
See also parameter
INU-LSU data set 10 data 3 value
.
For the selections, see parameter
.
Displays (in integer format) the data to be sent to the other
converter as word 1 of data set 10.
If no data has been preselected by
, the value to be sent can be written directly into
this parameter.
0
0…65535
Data to be sent as word 1 of data set 10.
Displays (in integer format) the data to be sent to the other
converter as word 2 of data set 10.
If no data has been preselected by
, the value to be sent can be written directly into
this parameter.
0
0…65535
Data to be sent as word 2 of data set 10.
Displays (in integer format) the data to be sent to the other
converter as word 3 of data set 10.
If no data has been selected by
, the value to be sent can be written directly into this
parameter.
0
0…65535
Data to be sent as word 3 of data set 10.
62
Mapping of data received through the DDCS link.
See also parameter group
.
(Follower only) Defines a target for the data received as word
1 from the master through the master/follower link.
See also parameter
.
None
None.
0
CW 16bit
Control Word (16 bits)
1
Ref1 16bit
Reference REF1 (16 bits)
2
Ref2 16bit
Reference REF2 (16 bits)
3
Source selection (see
). -
(Follower only) Defines a target for the data received as word
2 from the master through the master/follower link.
See also parameter
.
For the selections, see parameter
No.
Name/Value
Description
Def
/
FbEq16
Summary of Contents for ACS880-x04
