![background image](http://html1.mh-extra.com/html/abb/acs880-x04/acs880-x04_firmware-manual_3389539549.webp)
Fieldbus control through the embedded fieldbus interface (EFB) 549
Selects a reference received through the
embedded fieldbus interface as speed
reference 2.
TORQUE REFERENCE SELECTION
Selects a reference received through the
embedded fieldbus interface as torque
reference 1.
Selects a reference received through the
embedded fieldbus interface as torque
reference 2.
FREQUENCY REFERENCE SELECTION
Selects a reference received through the
embedded fieldbus interface as frequency
reference 1.
Selects a reference received through the
embedded fieldbus interface as frequency
reference 2.
OTHER SELECTIONS
EFB references can be selected as the source at virtually any signal selector parameter by
selecting
, then either
.
CONTROL OF RELAY OUTPUTS, ANALOG OUTPUTS AND DIGITAL INPUT/OUTPUTS
Connects bit 0 of storage parameter
to relay output RO1.
Connects bit 1 of storage parameter
to relay output RO2.
Connects bit 2 of storage parameter
to relay output RO3.
(default)
Sets the digital input/output to output mode.
Connects bit 8 of storage parameter
to digital input/output
DIO1.
Connects bit 9 of storage parameter
to digital input/output
DIO2.
to analog output AO1.
to analog output AO2.
Parameter
Setting for
fieldbus control
Function/Information
Summary of Contents for ACS880-x04
