![background image](http://html1.mh-extra.com/html/abb/acs880-x04/acs880-x04_firmware-manual_3389539037.webp)
Program features 37
Example parameter settings
The following is a checklist of parameters that need to be set when configuring the
master/follower link. In this example, the master broadcasts the Follower control
word, a speed reference and a torque reference. The follower returns a status word
and two actual values (this is not compulsory but is shown for clarity).
Master settings:
• Master/follower link activation
•
(fiber optic channel or XD2D selection)
•
(
= 1)
•
(for both fiber optic and wire connection)
•
for wire)
• Data to be broadcast to the followers
•
=
(Follower control word)
•
=
•
=
• Data to be read from the followers (optional)
•
(selection of followers that data is read from)
•
…
(mapping of data received from followers)
Follower settings:
• Master/follower link activation
•
(fiber optic channel or XD2D selection)
•
= 2…60
•
(for both fiber optic and wire connection)
•
for wire)
• Mapping of data received from master
•
=
•
=
•
=
• Selection of operating mode and control location
•
or
•
•
=
• Selection of reference sources
•
•
• Selection of data to be sent to master (optional)
•
=
•
=
•
=
Summary of Contents for ACS880-x04
