382 Parameters
(Follower only) Defines a target for the data received as word
3 from the master through the master/follower link.
See also parameter
.
For the selections, see parameter
.
Defines a target for the data received as word 1 from the first
follower (ie. the follower with node address 2) through the
master/follower link.
See also parameter
.
None
None.
0
Follower SW
Status word of the follower. See also parameter
26
). -
Defines a target for the data received as word 2 from the first
follower (ie. the follower with node address 2) through the
master/follower link.
See also parameter
.
For the selections, see parameter
Defines a target for the data received as word 3 from the first
follower (ie. the follower with node address 2) through the
master/follower link.
See also parameter
.
For the selections, see parameter
Defines a target for the data received as word 1 from the
second follower (ie. the follower with node address 3) through
the master/follower link.
See also parameter
.
For the selections, see parameter
Defines a target for the data received as word 2 from the
second follower (ie. the follower with node address 3) through
the master/follower link.
See also parameter
.
For the selections, see parameter
Defines a target for the data received as word 3 from the
second follower (ie. the follower with node address 3) through
the master/follower link.
See also parameter
.
For the selections, see parameter
Defines a target for the data received as word 1 from the third
follower (ie. the follower with node address 4) through the
master/follower link.
See also parameter
.
For the selections, see parameter
Defines a target for the data received as word 2 from the third
follower (ie. the follower with node address 4) through the
master/follower link.
See also parameter
.
For the selections, see parameter
No.
Name/Value
Description
Def
/
FbEq16
Summary of Contents for ACS880-x04
