354 Parameters
Act1 32bit
Actual value ACT1 (32 bits)
15
Act2 32bit
Actual value ACT2 (32 bits)
16
SW2 16bit
Status Word 2 (16 bits)
24
). -
…
…
…
…
See parameter
.
53
Selection of data to be transferred from fieldbus controller to
drive through fieldbus adapter A.
Note:
32-bit values require two consecutive parameters.
Whenever a 32-bit value is selected in a data parameter, the
next parameter is automatically reserved.
…
select data to be transferred from
the fieldbus controller to the drive through fieldbus adapter A.
None
None.
0
CW 16bit
Control Word (16 bits)
1
Ref1 16bit
Reference REF1 (16 bits)
2
Ref2 16bit
Reference REF2 (16 bits)
3
CW 32bit
Control Word (32 bits)
11
Ref1 32bit
Reference REF1 (32 bits)
12
Ref2 32bit
Reference REF2 (32 bits)
13
CW2 16bit
Control Word 2 (16 bits)
21
). -
…
…
…
…
See parameter
.
54
Fieldbus adapter B configuration.
Displays the type of the connected fieldbus adapter module.
0
= Module is not found or is not properly connected, or is
disabled by parameter
1
= FPBA;
32
= FCAN;
37
= FDNA;
101
= FCNA,
128
= FENA-11/21;
135
= FECA;
136
= FEPL;
485
= FSCA.
This parameter is read-only.
-
…
are adapter module-specific. For
more information, see the documentation of the fieldbus
adapter module. Note that not all of these parameters are
necessarily in use.
-
0…65535
Fieldbus adapter configuration parameter.
1 = 1
…
…
…
…
See parameter
-
0…65535
Fieldbus adapter configuration parameter.
1 = 1
Validates any changed fieldbus adapter module configuration
settings. After refreshing, the value reverts automatically to
Note:
This parameter cannot be changed while the drive is
running.
Done
Refreshing done.
0
No.
Name/Value
Description
Def
/
FbEq16
Summary of Contents for ACS880-x04
