![background image](http://html1.mh-extra.com/html/abb/acs880-x04/acs880-x04_firmware-manual_3389539085.webp)
Program features 85
The action (none, warning or fault) taken when the signal exits the allowed operation
area can be selected separately for overload and underload conditions (parameters
and
respectively). Each condition also has an optional timer to delay the
selected action (
).
Settings
(page
).
Automatic fault resets
The drive can automatically reset itself after overcurrent, overvoltage, undervoltage
and external faults. The user can also specify a fault (excluding Safe torque off
related faults) to be reset automatically.
By default, automatic resets are off and must be specifically activated by the user.
WARNING!
Before you activate the function, make sure that no dangerous
situations can occur. The function resets the drive automatically and continues
operation after a fault.
Settings
Parameters
(page
).
Monitored signal (
(%)
(%)
(%)
(%)
OVERLOAD
UNDERLOAD
ALLOWED
OPERATION
(rpm)
(Hz)
Speed
Frequency
Summary of Contents for ACS880-x04
