ABB ACS880-x04, Firmware Manual

Page: 375 / 604

Parameters 375
60.60 DDCS controller
ref1 type Selects the type and scaling of reference 1 received from the
external controller. The resulting value is shown by
03.11
DDCS controller ref 1 .
Auto
Auto Type and scaling are chosen automatically according to which
reference chain (see settings
Torque , Speed , Frequency ) the
incoming reference is connected to. If the reference is not
connected to any chain, no scaling is applied (as with setting
Transparent ).
0
Transparent No scaling is applied. 1
General Generic reference with a scaling of 100 = 1 (ie. integer and
two decimals). 2
Torque The scaling is defined by parameter 46.03 Torque scaling . 3
Speed The scaling is defined by parameter 46.01 Speed scaling . 4
Frequency The scaling is defined by parameter 46.02 Frequency scaling . 5
60.61 DDCS controller
ref2 type Selects the type and scaling of reference 2 received from the
external controller. The resulting value is shown by
03.12
DDCS controller ref 2 .
For the selections, see parameter 60.60 DDCS controller ref1
type .
Auto
60.62 DDCS controller
act1 type Selects the type/source and scaling of actual value ACT1
transmitted to the external controller. Auto
Auto Type/source and scaling follow the type of reference 1
selected by parameter
60.60 DDCS controller ref1 type . See
the individual settings below for the sources and scalings.
0
Transparent Reserved. 1
General Reserved. 2
Torque 01.10 Motor torque is sent as actual value 1. The scaling is
defined by parameter 46.03 Torque scaling .
3
Speed 01.01 Motor speed used is sent as actual value 1. The scaling
is defined by parameter 46.01 Speed scaling .
4
Frequency 01.06 Output frequency is sent as actual value 1. The scaling
is defined by parameter 46.02 Frequency scaling .
5
60.63 DDCS controller
act2 type Selects the type/source and scaling of actual value ACT2
transmitted to the external controller. Auto
Auto Type/source and scaling follow the type of reference 2
selected by parameter
60.61 DDCS controller ref2 type . See
the individual settings below for the sources and scalings.
0
Transparent Reserved. 1
General Reserved. 2
Torque 01.10 Motor torque is sent as actual value 2. The scaling is
defined by parameter 46.03 Torque scaling .
3
Speed 01.01 Motor speed used is sent as actual value 2. The scaling
is defined by parameter 46.01 Speed scaling .
4
Frequency 01.06 Output frequency is sent as actual value 2. The scaling
is defined by parameter 46.02 Frequency scaling .
5
60.64 Mailbox dataset
selection Selects the pair of data sets used by the mailbox service in the
drive/controller communication.
See section
External controller interface (page 39 ).
Dataset
32/33
Dataset 32/33 Data sets 32 and 33. 0
No. Name/Value Description Def / FbEq16