12 Introduction to the manual
Contents of the manual
This manual contains the following chapters:
•
provides basic instructions for the use of the control panel.
•
Control locations and operating modes
describes the control locations and
operating modes of the drive.
•
contains descriptions of the features of the ACS880 primary
control program.
•
contains a short description of each macro together with a
connection diagram. Macros are pre-defined applications which will save the user
time when configuring the drive.
•
describes the parameters used to program the drive.
•
contains further information on the parameters.
•
lists the warning and fault messages with possible causes and
remedies.
•
Fieldbus control through the embedded fieldbus interface (EFB)
describes the
communication to and from a fieldbus network using the embedded fieldbus
interface of the drive.
•
Fieldbus control through a fieldbus adapter
describes the communication to and
from a fieldbus network using an optional fieldbus adapter module.
•
showing the parameter structure within the drive.
Related documents
Note:
A quick start-up sequence for a speed control application is provided by
ACS880 drives with primary control program, Quick start-up guide
(3AUA0000098062), delivered with the drive.
A list of related manuals is printed on the inside of the front cover.
Summary of Contents for ACS880-x04
