![background image](http://html1.mh-extra.com/html/abb/acs880-x04/acs880-x04_firmware-manual_3389539384.webp)
384 Parameters
Displays, in integer format, the data received from the second
follower (ie. follower with node address 3) as word 2.
Parameter
select a target for the received data. This parameter can also
be used as a signal source by other parameters.
0
0…65535
Data received as word 2 from follower with node address 3.
Displays, in integer format, the data received from the second
follower (ie. follower with node address 3) as word 3.
Parameter
select a target for the received data. This parameter can also
be used as a signal source by other parameters.
0
0…65535
Data received as word 3 from follower with node address 3.
Displays, in integer format, the data received from the third
follower (ie. follower with node address 4) as word 1.
Parameter
select a target for the received data. This parameter can also
be used as a signal source by other parameters.
0
0…65535
Data received as word 1 from follower with node address 4.
Displays, in integer format, the data received from the third
follower (ie. follower with node address 4) as word 2.
Parameter
select a target for the received data. This parameter can also
be used as a signal source by other parameters.
0
0…65535
Data received as word 2 from follower with node address 4.
Displays, in integer format, the data received from the third
follower (ie. follower with node address 4) as word 3.
Parameter
select a target for the received data. This parameter can also
be used as a signal source by other parameters.
0
0…65535
Data received as word 3 from follower with node address 4.
In the master, displays the status of the communication with
followers specified by parameter
In a follower, bit 0 indicates the status of the communication
with the master.
-
0000h…FFFFh
M/F communication status (followers 1…16).
1 = 1
No.
Name/Value
Description
Def
/
FbEq16
Bit
Name
Description
0
Follower 1
1 (in the master) = Communication with follower 1 OK.
1 (in a follower) = Communication with master OK.
1
Follower 2
1 = Communication with follower 2 OK.
…
…
…
15
Follower 16
1 = Communication with follower 16 OK.
Summary of Contents for ACS880-x04
