Zeiss LSM 880, Руководство по эксплуатации

Страница: 93 / 690

CHAPTER 1 - SYSTEM OPERATION
LSM 880 Left Tool Area and Hardware Control Tools ZEISS
10/2014 V_01 000000-2071-464 87
5.2.7.4 Stage Control
If the Stage button is pressed, the Stage control
panel will appear (Fig. 102).
By pressing the
Stop
button you can interrupt any
stage movement.
The
Move to Zero
button will move the stage to
the current zero positions of the x and y
coordinates. The compass rose will move the stage
in the direction of the arrowheads.
Fast movement is obtained with the outer rose,
slow movement with the inner rose.
The
X-Position (µm) and Y-Position (µm) display
boxes show the actual x and y coordinates. You
can edit the numbers by typing or using the
arrowheads. If numbers were altered, the first click
on the compass rose will bring the stage to the
altered position.
The
Step Size (µm) display box shows the currently used step size for stage movement. The value can be
edited by typing or using the arrowheads.
The
Zero Position Set button sets the x and y coordinates to 0.
If the Mark button is pressed, the current position will be stored.
Pressing the Move to button will bring the stage back to this position. By pressing Remove , the actual
displayed position will be deleted. Pressing
Remove All
will delete all stored positions.
Fig. 102 Stage control – expanded view