Zeiss LSM 880, Руководство по эксплуатации

Страница: 227 / 690

CHAPTER 1 - SYSTEM OPERATION
LSM 880 Left Tool Area and Hardware Control Tools ZEISS
10/2014 V_01 000000-2071-464 221
Stretched exponential
You can select between bunching and anti-
bunching terms by pressing the
Bunching or
Antibunching
buttons, respectively (Fig. 288).
You can select between 1 (mono exponential) or 2
(double exponential) stretched exponential terms
by pressing the
Components 1
or
2
buttons. The
active option will be displayed in blue
You can select between normalized and non-
normalized terms by selecting / deselecting the
Normalized
check box.
You can select between dependent and
independent stretched exponentials by choosing
from the
Components
drop down menu. This
becomes only available, if two components are
active.
Note, the frequencies and stretch factors are
no fit parameters and must be defined in the
Frequencies k
1
and
k
2
as well as the
Stretch
factors
κ
1
and
κ
2
display boxes. Either enter
a value or press the 1 button for the default
setting.
The description box will give information on the
stretched exponential terms.
For two components, only the formula for
dependent processes is presently available.
Fig. 288 Stretched exponential Settings
panel