Zeiss LSM 880, Руководство по эксплуатации

Страница: 456 / 690

CHAPTER 1 - SYSTEM OPERATION
ZEISS Center Screen Area / Image Containers - Display and Image Analysis LSM 880
450 000000-2071-464 10/2014 V_01
3D:
On the 3D View control panel the different render modes are accessible:
Shadow
,
Transparent
,
Maximum
,
Surface
and
Mixed
. The rendering quality can be adjusted by using
the slider. The Create image button opens a new image
window and produces a 2D image of the currently used render mode. It uses the screen resolution unless
it is otherwise defined in the
Settings
tab (see there).
Clipping
activates the Clipping Plane functionality. 3 different Clipping Planes are displayed
and can be operated individually via 3 Buttons:
The Cut button toggles between different clipping behaviors of the respective planes.
On the Clipping Planes different surfaces can be chosen from a pull down list:
The Position of the clipping planes can be adjusted by the
Position Slider .
Further functionality is available on the Clipping Plane View control tab  see there.
A wedge between 2 Planes can be clipped using the pull down underneath the activation
check box for the clipping functionality.
Appearance:
On this view control panel the settings for the respective render mode are available.
Clipping:
3D VisArt has the option to cut off certain parts of the 3D information by using so called "clipping
planes". All the necessary tools to operate the clipping planes are found on this control panel.