Zeiss LSM 880, Руководство по эксплуатации

Страница: 242 / 690

CHAPTER 1 - SYSTEM OPERATION
ZEISS Left Tool Area and Hardware Control Tools LSM 880
236 000000-2071-464 10/2014 V_01
5.3.9 Multidimensional Acquisition Tools
– Time Series
The
Time Series
tool is only available if the
Time
Series box in the tab activation area is checked
(Fig. 338).
In the
Time Series tool you can set kinetics
parameters.
•
Click on the Time Series tool tab to open or
close the
Time Series
tool (Fig. 313).
You have the following input boxes:
Number
Indicates how often kinetic data points will be
taken. Enter a number in the input box or use the
scroll arrows.
Point to point time
Defines on how the single kinetic data points will
be spaced in time.
Note, if the spacing is to short for a kinetic
data point to be finished, the system will
take the minimal required time, i.e. it
completes the data point and immediately
starts the next.
Shape
allows you to choose from three possibilities of
distributing the time spacing between single data
points:
const (constant) (Fig. 314), linear
(Fig. 315) and exp (exponential) (Fig. 316). Choose
the appropriate entry from the drop down menu.
Summand
allows to define the linear increase in the spacing
between data points if
linear
was chosen in
Shape . Factor allows to define the exponential
increase in the spacing between data points if
exp
was chosen in Shape . For const this option is
disabled. Select a summand / factor by choosing an
appropriate one from the drop down menu. Note
that only predefined values are available.
Fig. 313 Time Series tool – constant shape
activated
Fig. 314 Time Series tool – shape drop down
menu
Fig. 315 Time series tool – linear shape
activated
Fig. 316 Time series tool – exponential
shape activated