Zeiss LSM 880, Руководство по эксплуатации

Страница: 563 / 690

CHAPTER 2 - MACROS AND VISUAL BASIC
LSM 880 Macros ZEISS
10/2014 V_01 000000-2071-464 5
Macros are stored and managed in project files
(*.lvb). Before you can record or edit a macro, you
have to create a project as follows:
•
Press the New button to create a project file
(see Fig. 4).
−
A new project is created and displayed in the
Project selection box. The project name is
automatically default (LSM followed by a
number), but can be edited afterwards.
To activate an existing project, proceed as follows:
•
Press the
Load
button.
−
The Open window will be opened (see
Fig. 5).
•
Select the relevant project file (data extension:
*.lvb ) from the Macros list box. Click on the
Open button.
−
The project file will be opened and the
macros contained in it are displayed in the
Project
selection box of the
Macro Control
window. You can use the pull down menu
to load any listed Macro.
Recorded macros are stored in main memory first.
Before the macros can be assigned to the list in the
Macro submenu, the project must be stored on
the hard disk.
•
Press the Save button under the project name
in the
Macro Control
window and determine
the file name in the Project selection box, if
required (see Fig. 6).
Fig. 4 Macro panel with new Macro assigned
Fig. 5 Open window
Fig. 6 Macro panel with existing Macro
assigned