Zeiss LSM 880 страница 130 Скачать руководство пользователя

Страница: 130 / 690

CHAPTER 1 - SYSTEM OPERATION

ZEISS

Left Tool Area and Hardware Control Tools

LSM 880

124

000000-2071-464

10/2014 V_01

5.2.9.4

Channel Settings for Airyscan

The detection settings of the Airyscan can be
controlled in the

Channels

tool (Fig. 163).

The pinhole will be set automatically to a correct
opening depending on the Airyscan mode.
The effective pinhole is defined by the Airyscan

detection surface and its zoom optics.
The hardware pinhole will automatically be opened

at twice the value, to avoid any signal loss.
The effective pinhole values will be displayed in the

line below the Airyscan modes.
Detection gain is set in the same way as the

internal detectors by the Gain and digital gain

sliders.

SR, VP, CO, Pinhole

To set the system for increased resolution mode,
press the

button (Fig. 164). In this mode, the

hardware pinhole has no effect and should not be
changed from the default position.
To set the system for virtual pinhole mode, press
the

button (Fig. 165). In this mode, the

hardware pinhole has no effect and should not be
changed from the default position.
To set the system for conventional confocal mode,
press the

button (Fig. 166). In this mode, the

hardware pinhole is effective and can be set at the
required value for confocal sectioning.

Fig. 163

Airyscan: Channels tool

Fig. 164

Airyscan Mode: SR

Fig. 165

Airyscan Mode: VP

Fig. 166

Airyscan Mode: CO

Содержание LSM 880



















































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание LSM 880

Отзывы:

Похожие инструкции для LSM 880

Бренды по названию

Популярные бренды

Zeiss LSM 880, Руководство по эксплуатации

Результаты поиска

Содержание LSM 880

Отзывы:

Похожие инструкции для LSM 880

Бренды по названию

Популярные бренды