Whirlpool ADVANTECH CAE2761K, Инструкция по установке, эксплуатации и обслуживанию

Страница: 52 / 178

2-38
11. Press keypad #6 to accept the setting, and
return to the owner settings.
12. Press keypad #2 to scroll to cycle price,
then press keypad 6. The current vend-
price will be displayed.
NOTE: The vend-price of the coinslide or
coindrop must match the control setup.
13. Increase or reduce the cycle price desired
for the card reader, or the cycle price as
determined by the mechanical setting of
the coinslide or coindrop by pressing key-
pad #1 (increase) or #2 (decrease), as
shown in the “Keypad Navigation” table on
the previous page.
14. When the proper vend-price is displayed,
press keypad #6 to return to owner set-
tings.
15. Press keypad #6 again to exit the setup and
return to vend-price.
NOTE: Additional cycle functions may be set
at this time, such as the top-off price for dry-
ers, or an extra charge for hot or warm water
for washers. See the OWNER SETTINGS
table in Section 6 for advanced features/
manual programming.
16. Insert the money card for card readers, or
the appropriate coins into the selected
money acceptor device to verify proper
operation.