Whirlpool ADVANTECH CAE2761K, Инструкция по установке, эксплуатации и обслуживанию

Страница: 51 / 178

2-37
7. If the service calls for a free-vend, push and
release keypad #3 (see the “Keypad Posi-
tions”). The unit is now ready for use as if
money was used. On dryers, push and
release keypad #6 to start.
8. If a money acceptor has been installed,
press keypad #1 to enter the “Owner Set-
tings.”
9. Scroll through the owner settings using
keypad #1 or #2 until the proper money
acceptor is located (
droP , SLidE , or CArd).
(See the OWNER SETTINGS tables in
Section 6.)
NOTE: Keypad #6 is hidden on two-speed
washers. Keypads #4, #5, and #6 are hidden
on single-speed washers.
10. Press keypad #3 to view the current setting
of the selected money acceptor. To change
the setting, use keypad #2 to toggle be-
tween 0 (disabled) and 1 (enabled).
Washer Keypad Positions
Dryer Keypad Positions
Washer
Keypad
Dryer
Keypad
HOT
1
Move up to the preceding
item on the list.
HIGH
1
WARM
2
Move down to the
next item on the list.
MEDIUM
2
COLD
3
Select an item to view
the current setting.
LOW
3
NORMAL
4
NO FUNCTION
ON
4
GENTLE
5
NO FUNCTION
OFF
5
HIDDEN
6
Exit OWNER SETTINGS
program. The display
returns to the cycle count.
START
6
KEYPAD MAPPING
6. Keypads are now re-mapped for navigating
the settings as listed in the following “Key-
pad Mapping” table.
HIGH
1
ON
4
MEDIUM
2
OFF
5
LOW
3
START
6
HOT
1
NORMAL
4
WARM
2
GENTLE
5
COLD
3
HIDDEN
6
Washer
Keypad
Dryer
Keypad
HOT
1
Increase the setting value.
Push and hold the keypad for a
fast increase.
HIGH
1
WARM
2
Decrease the setting value.
Push and hold the keypad for a
fast decrease.
MEDIUM
2
COLD
3
NO FUNCTION
LOW
3
NORMAL
4
NO FUNCTION
ON
4
GENTLE
5
NO FUNCTION
OFF
5
HIDDEN
6
Accept the new setting value.
The display returns to the
OWNER SETTINGS list.
START
6
KEYPAD NAVIGATION