Whirlpool ADVANTECH CAE2761K, Инструкция по установке, эксплуатации и обслуживанию

Страница: 143 / 178

6-15
OWNER SETTINGS
1. Perform all steps under “Access Mode” on
page 6-13.
2. Push and release keypad position 1 (HIGH).
3. Keypads are now re-mapped for navigating
the settings as follows:
KEYPAD NAVIGATING OWNER SETTINGS
HIGH
1
up
Move up to the preceding item on the list.
Refer to the
OWNER SETTINGS TABLE
.
MEDIUM
2 down
Move down to the next item on the list.
Refer to the
OWNER SETTINGS TABLE
.
LOW
3
select
Select an item to view the current setting.
Refer to the
OWNER SETTINGS TABLE.
ON
4
no function
OFF
5
no function
START
6
exit
Exit
OWNER SETTINGS
program. Display
returns to the cycle count.
_
_
KEYPAD CHANGING OWNER SETTINGS
HIGH
1
(+)
increase
Increase the setting value. Push and
hold the keypad for fast increase.
Refer to the
OWNER SETTINGS TABLE.
MEDIUM
2 decrease
Decrease the setting value. Push and
hold the keypad for fast decrease.
Refer to the
OWNER SETTINGS TABLE.
LOW
3
no function
ON
4
no function
OFF
5
no function
START
6
accept
Accept the new setting value. Display
returns to
OWNER SETTINGS
list.
– ( )
–
–
–
4. When an item on the list is selected, the
current setting is displayed. To change a
setting, use the keypads as follows:
5. To accept the displayed setting, press key-
pad #6, and the program will return to the
OWNER SETTINGS menu.
6. After all changes to the OWNER SET-
TINGS are complete, press keypad #6 twice
to exit the program. The display returns to
the vend-price.
CODE DESCRIPTION
Coinslide is pushed in.
Dryer door is closed.
Coindrop #2 receives coin.
Coindrop #1 receives coin.
Auxiliary (Smart Card) is working properly.
LED DISPLAY CODES
While in the Service mode, test of the following
components can be made by manually activat-
ing the corresponding components.