Whirlpool ADVANTECH CAE2761K, Инструкция по установке, эксплуатации и обслуживанию

Страница: 138 / 178

6-10
ADDITIONAL INFORMATION
Additional information about the machine’s
performance, such as usage per given day of
the week, or when the AC power was turned
off, is available when gathering data via the
Palm

handheld. For more information on this
feature, see ADVANTECH

Commercial Laun-
dry Products Software User’s Manual
#8524743 .
OWNER SETTINGS
1. Perform all steps under “Access Mode” on
page 6-8.
2. Push and release keypad position 1 (HIGH).
3. Keypads are now re-mapped for navigating
the settings as follows:
DISPLAY
EXPLANATION
Service person placed machine out of service.
See
MANUAL OUT OF SERVICE
section.
Machine has been set to be unavailable for
customer use by means of one of the three owner
‘special’ prices. See SP 1, SP 2 and SP 3 (special
price).
No money device is enabled during machine
setup. Please enable the Smart Card. See
OWNER
SETTINGS.
The setup may be requesting a coindrop. See
OWNER SETTINGS.
An error has occurred with an auxiliary device,
such as a Smart Card unit not plugged into
connector of control board. (The Owner Setting is
enabled but device is not installed.) See
OWNER
SETTINGS.
Off Codes
The display shows the word “OFF” to inform
the customer the machine is out of service. If
money is added to the machine, it will be lost.
Refer to the “Off Codes” table.
4. When an item on the list is selected, the
current setting is displayed by pressing
keypad #3. To change a setting, use the
keypads as follows:
5. To accept the displayed setting, press key-
pad #6, and the program will return to the
OWNER SETTINGS menu.
6. After all changes to the OWNER SET-
TINGS are complete, press keypad #6 twice
to exit the program. The display returns to
the vend-price.
KEYPAD NAVIGATING OWNER SETTINGS
HIGH
1 up
Move up to the preceding item on the list.
Refer to the
OWNER SETTINGS
table.
MEDIUM
2 down
Move down to the next item on the list.
Refer to the
OWNER SETTINGS
table.
LOW
3
select
Select an item to view the current setting.
Refer to the
OWNER SETTINGS
table.
ON
4
—
no function
OFF
5
— no function
START
6
exit
Exit
OWNER SETTINGS
program. Display
returns to the cycle count.
KEYPAD CHANGING OWNER SETTINGS
HIGH
1
(+)
increase
Increase the setting value. Push and hold the
keypad for fast increase. Refer to the
OWNER
SETTINGS
table.
MEDIUM
2
(–)
decrease
Decrease the setting value. Push and hold the
keypad for fast decrease. Refer to the
OWNER
SETTINGS
table.
LOW
3
— no function
ON
4
— no function
OFF
5
— no function
START
6
accept
Accept the new setting value. Display returns
to
OWNER SETTINGS
list.
DISPLAY
DESCRIPTION
Default
Setting
Parameters
CYCLE PRICE
— $ dollars
0.75 0.00 to 100.00
CYCLE TIME
—
minutes
45 5 to 120
TOP OFF PRICE
—
$ dollars
0.50 0.00 to 100.00
TOP OFF TIME
— minutes
15 0 to 120
CALENDAR YEAR 2000 2000 to 2030
CALENDAR DATE
— month and day
1.1
(Jan. 1)
1 to 12 months
1 to 31 days
TIME
—
24-hour clock
(hours.minutes)
0.00 0.00 to 23.59
OWNER SETTINGS TABLE