Shihlin SA3 Series, Руководство пользователя

Страница: 378 / 423

Appendix 1 Parameter table
APPENDIX 376
Group
Parameter
Number
Name Setting Range Default Page
06-13 P.281 Input phase loss protection
0: Off
0 190
1: When input phase loss, inverter stops and
alarms IPF
06-14 P.287 SCP Short circuit protection function
0: Off
1 191
1: When output side is short, inverter stops
and alarms SCP.
06-15 P.533 PTC alarm action
0: Alarm and continue to run
0 191
1: Alarm and decelerate to stop
2: Alarm and stop freely
3: No alarm
06-16 P.534 Percentage of PTC level 0～100.0% 0.0% 191
06-17 P.261 Maintenance alarm function
0: Off
0 192 1～9998day: Used to set the time for
maintenance alarm output signal
06-18 P.280
Short circuit to ground detection when
starting
0: Off
0 192 1: When given run command to inverter,
inverter detects short circuit to ground
06-19 P.282 GF detection level when running
280K/315KF and below model:0~100.0% 50.0%
192
315K/355KF and above model:0~100.0% 70.0%
06-20 P.262 Output phase loss protection
0: Off
0 193
1: When output phase loss, inverter stops
and alarms LF.
06-21 P.705 Low voltage level
220V inverter : 155～220V 155V
193
440V inverter : 310～440V 310V
06-22 P.706 Regenerative brake operation level
220V inverter : 205～400V 360V
193
440V inverter : 410～800V 720V
06-23 P.707 Voltage stall level
220V inverter : 205～400V 380V
194
440V inverter : 410～800V 760V
06-24 P.708
Capacitor lifetime detection 0: Off 0
194
Capacitor lifetime detection
1: When the power is OFF, start to detect the
lifetime of capacitor on main circuit.
0
06-25 P.709 Capacitor lifetime detection level 0～100.0% 100.0% 194
06-26 P.710 Capacitor lifetime detection result
0: Normal. Read
only
194
1: Electrolytic capacitor abnormal.
06-27 P.292 Total inverter operation time (minutes) 0～1439 min 0 min 195
06-28 P.293 Total inverter operation time (days) 0～9999 day 0 day 195
06-29 P.296 Total inverter power on time (minutes) 0～1439 min 0 min 195
06-30 P.297 Total inverter power on time (days) 0～9999 day 0 day 195
06-31 P.298 Output power(lower 16 bit) Read only Read 195
06-32 P.299 Output power(higher 16 bit) Read only Read 195
06-40 P.288 Alarm record code query Choose 0～12 recorded alarm 1 195
06-41 P.289 Alarm record code display Read only Read 195
06-42 P.290 Alarm record message query Choose 0～10 recorded alarm 0 195
06-43 P.291 Alarm record message display Read only Read 195