Shihlin SA3 Series, Руководство пользователя

Страница: 338 / 423

Appendix 1 Parameter table
APPENDIX 336
Parameter
Number
Group Name Setting Range Default Page
P.273 10-33
When input power fail stop
option
0: Off.
0 264
1: No under-voltage avoidance (If under-voltage or
power fail, the motor decelerates to stop.)
2: No under-voltage avoidance (If under-voltage or
power fail, the motor decelerates to stop. Motor
re-accelerates if power restores during the
deceleration to stop.)
11: under-voltage avoidance If under-voltage or
power fail, the motor decelerates to stop.)
12: under-voltage avoidance (If under-voltage or
power fail, the motor decelerates to stop. Motor
re-accelerates if power restores during the
deceleration to stop.)
P.274 10-34
When input power fail
subtracted frequency at
deceleration start
0～20.00Hz 3.00Hz 264
P.275 10-35
When input power fail
subtraction starting
frequency
0～120.00Hz: When output frequency≥10-35
(P.275), Motor decelerates from “output frequency -
10-34(P.274)”；When output frequency＜10-35
(P.275), deceleration from output frequency
50.00Hz 264
99999: Motor decelerates from “output frequency -
10-34(P.274)”
P.276 10-36
Deceleration time during
input power failure 1
0~360.00s/0~3600.0s 5.00s 264
P.277 10-37
Deceleration time during
input power failure 2
0~360.00s//0~3600.0s: Set deceleration time below
the set frequency of 10-38 (P.278)
99999 264
99999: Set deceleration time to the set frequency of
10-38 (P.278)
P.278 10-38
When input power fail
deceleration time switch-over
frequency
0～650.00Hz 50.00Hz 264
P.279 10-39 UV avoidance voltage gain 0～200.0% 100.0% 264
P.280 06-18
Short circuit to ground
detection when starting
0: Off
0 192 1: When given run command to inverter, inverter
detects short circuit to ground
P.281 06-13 Input phase loss protection
0: Off
0 190 1: When input phase loss, inverter stops and alarms
IPF
P.282 06-19
GF detection level when
running
280K/315KF and below model:0~100.0% 50.0%
192
315K/355KF and above model:0~100.0% 70.0%
P.285 13-02
Low frequency vibration
suppression factor
0～8 5 293
P.286 13-03
High frequency vibration
suppression factor XX00～XX15
509 293
00XX ~15XX