Shihlin SA3 Series, Руководство пользователя

Страница: 384 / 423

Appendix 1 Parameter table
APPENDIX 382
Group
Parameter
Number
Name Setting Range Default Page
08-35 P.722
PID parameter switch-over deviation
upper limit
0～100.00% 80.00% 233
08-36 P.723 PID disconnection operation option 1
0: Select no need to run to the upper limit
when PID is disconnected
1 234
1: Select need to run to the upper limit when
PID is disconnected
08-39 P.726
PID counting when inverter stop action
selection
0: PID stop counting when inverter stop
0 234
1: PID keep counting when inverter stop
08-40 P.727
PID allowed reverse rotation action
selection 0: PID does not allow reverse rotation
0 234
1: PID allows reverse rotation
08-41 P.728 PID in reverse direction integral limit 0～100.0% 0.0% 234
08-42 P.729 PID minimum output frequency 0～10.00Hz 0.00Hz 234
08-43 P.251
PID pressure range (Bar) setting
1.0~100.0 100.0 234
08-44 P.252 PID unit selection
0: %
0 235
1: bar
2: --
3: kgs
4: kg
5: psi
6: Pa
7: kPa
8: MPa
9: C
08-45 P.253 Disconnection detection time feedback 0.0~600.0s 0.0s 235
08-46 P.254
Disconnection processing method
feedback
0: AEr alarm, inverter free stop
0 235 1: Slow down and stop, call AEr alarm
2: AEr alerts and continues running
08-50 P.724 PID target linear change time 0~650.00s 0.00s 235
09-00 P.349 Encoder type
0：ABZ
0 238
1：ABZ (For synchronous motor)
2：Resolver 1x synchronous motor standard
encoder
3：ABZ/UVW synchronous motor standard
encoder
09-01 P.350 Encoder pulse 1 0～20000 1024 238
09-02 P.351 Encoder input type 1
0：Off
0 238
1：A/Phase B pulse wave，forward spin if
Phase A is over Phase B for 90 degrees
2：A/Phase B pulse wave，forward spin if
Phase B is over Phase A for 90 degrees.
3：Phase A :pulse wave，Phase B:directional
sign，L:reverse spin，H:forward spin
4：Phase A :pulse wave，Phase B: directional
sign，L:forward spin，H:reverse spin