Shihlin SA3 Series, Руководство пользователя

Страница: 334 / 423

Appendix 1 Parameter table
APPENDIX 332
Parameter
Number
Group Name Setting Range Default Page
P.193 02-13
Terminal 2-5 maximum input
positive voltage
0～10.00V
10.00V 124
P.194 02-14
Percentage corresponds to
terminal 2-5 minimum
positive voltage
-100.0%～100.0%
0.0% 124
-400.0%～400.0%(02-00(P.500)= 2/14/15/16/17)
P.195 02-15
Percentage corresponds to
terminal 2-5 maximum
positive voltage
-100.0%～100.0%
100.0% 124
-400.0%～400.0%(02-00(P.500)= 2/14/15/16/17)
P.196 02-27
Percentage corresponds to
terminal 4-5 minimum input
current/ voltage
-100.0%～100.0%
0.0% 130
-400.0%～400.0%(02-00(P.500)= 2/14/15/16/17)
P.197 02-28
Percentage corresponds to
terminal 4-5 maximum input
current/ voltage
-100.0%～100.0%
100.0% 130
-400.0%～400.0%(02-00(P.500)= 2/14/15/16/17)
P.198 02-25
Terminal 4-5 minimum input
current/ voltage
0～20.00mA
4.00mA 130
P.199 02-26
Terminal 4-5 maximum input
current/ voltage
0～20.00mA
20.00m
A
130
P.215 01-43 Second base voltage
0～1000.0V
99999 111
99999：Change according to the input voltage
P.220 06-04
Acceleration and
deceleration
time when
current stall
0: According to the current Acc/Dec time
3 185
1: According to the first Acc/Dec time
2: According to the second Acc/Dec time
3: Automatically calculate proper
Acc/Dec time
P.225 08-03 PID target value 0～08-43(P.251) 20.0% 226
P.229 10-18
Dwell function selection
0: Off.
0 258
1: Backlash compensation function.
2: Acceleration and deceleration interrupt waiting
function.
P.230 10-19
Dwell frequency at
acceleration
0～650.00Hz
1.00Hz 258
P.231 10-20
Dwell time at acceleration 0～360.0s
0.5s 258
P.232 10-21
Dwell frequency at
deceleration
0～650.00Hz
1.00Hz 258
P.233 10-22
Dwell time at deceleration 0～360.0s
0.5s 258
P.234 10-23
Triangular wave function
selection
0: Off.
0 260
1: If terminal function TRI is triggered, triangular
wave function will on.
2: Triangular wave function is on at all time.
P.235 10-24
Maximum amplitude 0～25.0%
10.0% 260
P.236 10-25
Amplitude compensation at
deceleration
0～50.0%
10.0% 260
P.237 10-26
Amplitude compensation at
acceleration
0～50.0%
10.0% 260
P.238 10-27 Amplitude acceleration time 0～360.00s/0～3600.0s 10.00s 260