Shihlin SA3 Series, Руководство пользователя

Страница: 258 / 423

Application parameter group 10
PARAMETER DESCRIPTION 256
5.11.6 Auto reset function

This function allows inverter to reset itself and restart when alarm occurs. Choose which alarm to reset.
Parameter Name Default Setting Range Content
10-12
P.65
Auto reset function 0
0 Off.
1 When over-voltage, inverter will reset.
2 When over-current, inverter will reset.
3 When either over-voltage or over-current, inverter will reset.
4 When any alarm occur, inverter will reset.
10-13
P.67
Auto reset times 0
0 Off.
1～10
If the alarm exceeds 10-13(P.67) times, inverter will not
reset.
10-14
P.68
Auto reset waiting time 1.0s 0～360.0s ---
10-15
P.69
Auto reset times count 0 Read only ---
Auto reset function

After alarm occur, inverter returns to the state before alarm, which is called “auto reset”.

The auto reset of inverter is conditional. If alarm occurs and inverter auto reset, but the alarm occurs again within
the time (10-14(P.68)*5), then this type of alarm is called “continuous alarm”. If the continuous alarm exceeds a
certain number of times, it means that there is a major fault, and this number is called “Auto reset times
(10-13(P.67)) ". At this time, inverter will no longer perform auto reset, and need manual troubleshooting by user.

If all alarms do not belong to “continuous alarm”, inverter can perform auto reset for an unlimited number of times.

The time between the occurrence of alarm and auto reset is called “Auto reset waiting time(10-14(P.68))”.

For each auto reset, 10-15(P.69) value will automatically add 1. Therefore, 10-15(P.69) value read from memory
represents the number of auto reset.

If set parameter 10-15(P.69)=0, auto reset times can be cleared
Note: After auto reset waiting time (10-14(P.68)), inverter will begin to perform auto reset. Therefore, when this function
is selected for application, it may cause danger to user, so please be very careful of that.
Setting