Shihlin SA3 Series, Руководство пользователя

Страница: 121 / 423

Analog input and output parameter group 02
PARAMETER DESCRIPTION 119
Group
Parameter
Number
Name Setting Range Default Page
02-44 P.543 Terminal FM output function selection
3: Output inverter temperature accumulate rising
rate, use NTC trigger level as 100%.
0 135
4: Output inverter thermal relay accumulate rate,
use the digital thermal relay trigger level ( 06-00
( P.9 ) ≠ 0 ) or the thermal relay on IGBT trigger
level ( 06-00 (P.9) = 0) as 100%.
5: Target frequency, use 02-51(P.55) value as
100%.
6: Fixed output, voltage or current output level
can be set by 02-54 (P.541)
7: Output voltage, use inverter rated voltage as
100%
8: Excitation current, use motor rated current as
100%. (Valid only when 00-21(P.300) or 00-22
(P.370) is set to 3~6)
9: Output torque, use two times motor rated
torque as 100%.(Valid only when 00-21 (P.300)
or 00-22 (P.370) is set to 3~6)
10: Output power, use two times motor rated
power as 100%.
11: High-speed pulse input, use 100KHz as
100%.
12: Motor speed, use 02-51 (P.55) as 100%
02-45 P.64 Terminal AM1 output signal selection 0: Output 0~10V across terminal AM1-5. 0 135
02-45 P.64 Terminal AM1 output signal selection
1: Reserved
0 135 2: Output 0~20mA across AM1-5.
3: Output 4~20mA across AM1-5.
02-46 P.191 Terminal AM1 output gain 0～5000 3210 135
02-47 P.190 Terminal AM1 output bias 0～5000 80 135
02-48 P.538 Terminal AM2 output signal selection Same as 02-45 0 137
02-49 P.536 Terminal AM2 output gain 0～5000 3210 137
02-50 P.535 Terminal AM2 output bias 0～5000 80 137
02-51 P.55
Maximum analog output frequency
reference
50Hz system: 1.00～650.00Hz 50.00Hz
137
60Hz system: 1.00～650.00Hz 60.00Hz
02-52 P.56
Maximum analog output current
reference
0~500.00A: below Frame G
According
to frame
137
0~5000.0A: Frame G and above
02-53 P.539 Terminal AM2 fixed output level 0～100.0% 0.0% 138
02-54 P.541 Terminal AM1/FM fixed output level 0～100.0% 0.0% 138
02-55 P.592 PT100 thermistor voltage level 1 0～10.00V 5.00V 138
02-56 P.593 PT100 thermistor voltage level 2 0～10.00V 7.00V 138
02-57 P.594 PT100 thermistor level 1 frequency 0～650.00Hz 0.00Hz 138
02-58 P.595 PT100 thermistor level 1 delay time 0～6000s 60s 138
02-59 P.187 FM calibration coefficient 0～9998 450 139