Shihlin SA3 Series, Руководство пользователя

Страница: 321 / 423

Appendix 1 Parameter table
APPENDIX 319
Parameter
Number
Group Name Setting Range Default Page
P.34 07-11
Communication
EEPROM write-in
selection
0: When writing parameters in communication
mode, write in RAM and EEPROM
0 204
1: When writing parameters through
communication, only write into RAM
P.35 00-19
Communication mode
selection
0: In communication mode, run signal and
frequency is given by communication.
0 94
1: In communication mode, run signal and
frequency is given by external signal.
P.36 07-01
COM1 inverter
communication station
number
0～254 0 204
P.37 00-08 Speed display
0: Display output frequency(not mechanical speed)
0 91 0.1~5000.0
1~50000
P.38 02-09
Terminal 2-5 maximum
running frequency
50Hz system: 1.00～650.00Hz 50.00Hz
124
60Hz system: 1.00～650.00Hz 60.00Hz
P.39 02-21
Terminal 4-5 maximum
operation frequency 50Hz system: 1.00～650.00Hz 50.00Hz
130
60Hz system: 1.00～650.00Hz 60.00Hz
P.40 03-10
Terminal SO1-SE output
function
0: RUN(Output when inverter running)
1 150
1: SU(Output when reach target frequency)
2: FU(Output when reach 03-21 03-22 value )
3: OL(Output when overload)
4: OMD(Output when output current is zero)
5: ALARM(Output when alarm)
6: PO1(Output when in program operation step)
7: PO2(Output when in program operation cycle)
8: PO3(Output when in program operation pause)
9: BP(Output when use inverter output in function :
switch between inverter and commercial
power-supply)
10: GP(Output when use commercial power supply
in function : switch between inverter and
commercial power-supply)
11：OMD1(Output when output current is zero 1)
12～15: Reserved
16: Output when cooling-fan is damaged
17: RY(Output when inverter is powered on and no
alarm)
18: Output when it’s time for maintenance
19: OL2 (Output when overload 2)
20: Output when capacitor abnormal
21: Output when in position control reach position
22：Output when detect curl
in
tension control
23：Output when detect power marker
24～40: Reserved
41: PID feedback disconnection alarm
P.41 03-20
Output frequency
detection sensitivity
0～100.0% 10.0% 154