Shihlin SA3 Series, Руководство пользователя

Страница: 222 / 423

Communication parameter group 07
PARAMETER DESCRIPTION 220
Data Content Unit
H0007 Inverter temperature rising accumulation rate 0.01
H0008 Inverter output power 0.01kW
H0009 Inverter NTC temperature accumulation 0.01
H000A Motor electronic thermal accumulation rate ---
H000B PID control target pressure 0.1%
H000C PID control feedback pressure 0.1%
H000D Motor rotating speed 0.01Hz
H000E Terminal HDI input frequency 0.01kHz
H000F Reserved ---
H0010 Terminal AM2-5 output voltage 0.01V
H0011 Inverter output torque 0.1%
H0012 Terminal 3-5 input voltage 0.01V
H0013 Communication expansion card version number ---
H0014
Power factor 0.001
H0015
Output power 0.01kWh/0.1kWh
H0016
PM motor rotor position ---
H0017
Motor speed(rpm) 0.1rpm/1rpm
H0018
Motor speed from PG feedback 0.01Hz
H0019
Induction motor rotor position(z phase as 0)
---
H001A
PG card A1 B1 feedback pulse
---
H001B
PG card A2 B2 received pulse
---
Note: 1. Digital input terminal state details
b0
STF STR M0 M1 M2 RES
M3
M4 M5
HDI
b1 b2 b3
b5
b6 b7 b8 b4 b9
0 0 0 0 0 0
b10 b11 b12 b13 b14 b15
2. Digital output terminal state details
SO1 SO2 ABC1 ABC2
A10
A11
A12
A13 A14
A15
A16 A17
SLOT3 expanded
digital output
b0 b1 b2 b3 b5 b6 b7 b8 b4 b9
0 0 0 0
b10 b11 b12 b13 b14 b15
5.8.2 Communication EEPROM write selection

Use this function if parameter settings are frequently written by communication.
Parameter Name Default Setting Range Content
07-11
P.34
Communication
EEPROM write-in
selection
0
0
When writing parameters in communication mode, write in
RAM and EEPROM
1
When writing parameters through communication, only write
into RAM