Shihlin SA3 Series, Руководство пользователя

Страница: 58 / 423

Terminal wire arrangement
INVERTER INTRODUCTION 56

Toggle switch
Switch
number
Switch
state
Explanation Remarks
SW1
* Input 0~10V voltage signal into terminal 3-5 Also requires setting 02-29,
please refer to section 5.3.7.
Input 4~20mA current signal into terminal 3-5
SW2
* Input 4~20mA current signal into terminal 4-5
Also requires setting 02-20,
please refer to section 5.3.6.
Input 0~10V voltage signal into terminal 4-5
SW3
* Output 0~10V voltage from terminal AM1 Also requires setting 02-45,
please refer to section 5.3.11.
Output 0~20mA/4~20mA current from terminal AM1
SW4
* Output 0~10V voltage from terminal AM2 Also requires setting 02-48,
please refer to section 5.3.12.
Output 0~20mA/4~20mA current from terminal AM2
SW5
* Select sink input mode Please refer to section 3.7.6 control logic
switch.
Select source input mode
SW6
* No resistor connected
When multiple inverters link together the
last inverter’s communication port should
be connected with a resistor, please refer
to section 5.8.1.
Connect to 120Ω communication terminal resister
Note: 1. The state with “*” is the default state of the switch.
2. The parts in black stand for switch handle.