Shihlin SA3 Series, Руководство пользователя

Страница: 367 / 423

Appendix 1 Parameter table
APPENDIX 365
Group
Parameter
Number
Name Setting Range Default Page
02-44 P.543
Terminal FM output function
selection
8: Excitation current, use motor rated current as
100%. (Valid only when 00-21(P.300) or 00-22 (P.370)
is set to 3~6)
0 135
9: Output torque, use two times motor rated torque as
100%.(Valid only when 00-21 (P.300) or 00-22 (P.370)
is set to 3~6)
10: Output power, use two times motor rated power as
100%.
11: High-speed pulse input, use 100KHz as 100%.
12: Motor speed, use 02-51 (P.55) as 100%
02-45 P.64
Terminal AM1 output signal
selection
0: Output 0~10V across terminal AM1-5. 0 135
02-45 P.64
Terminal AM1 output signal
selection
1: Reserved
0 135 2: Output 0~20mA across AM1-5.
3: Output 4~20mA across AM1-5.
02-46 P.191 Terminal AM1 output gain 0～5000 3210 135
02-47 P.190 Terminal AM1 output bias 0～5000 80 135
02-48 P.538
Terminal AM2 output signal
selection
Same as 02-45 0 137
02-49 P.536 Terminal AM2 output gain 0～5000 3210 137
02-50 P.535 Terminal AM2 output bias 0～5000 80 137
02-51 P.55
Maximum analog output
frequency reference 50Hz system: 1.00～650.00Hz 50.00Hz
137
60Hz system: 1.00～650.00Hz 60.00Hz
02-52 P.56
Maximum analog output
current reference
0~500.00A: below Frame G Accordin
g to
frame
137
0~5000.0A: Frame G and above
02-53 P.539
Terminal AM2 fixed output
level
0～100.0% 0.0% 138
02-54 P.541
Terminal AM1/FM fixed
output level
0～100.0% 0.0% 138
02-55 P.592
PT100 thermistor voltage
level 1
0～10.00V 5.00V 138
02-56 P.593
PT100 thermistor voltage
level 2
0～10.00V 7.00V 138
02-57 P.594
PT100 thermistor level 1
frequency
0～650.00Hz 0.00Hz 138
02-58 P.595
PT100 thermistor level 1
delay time
0～6000s 60s 138
02-59 P.187 FM calibration coefficient 0～9998 450 139