Shihlin SA3 Series, Руководство пользователя

Страница: 366 / 423

Appendix 1 Parameter table
APPENDIX 364
Group
Parameter
Number
Name Setting Range Default Page
02-34 P.548
Terminal 3-5 minimum input
current/ voltage
0～10.00V 0.00V 132
02-35 P.549
Terminal 3-5 maximum input
current/ voltage
0～10.00V 10.00V 132
02-36 P.546
Percentage corresponds to
terminal 3-5 minimum input
current/ voltage
-100.0%～100.0%
0.0% 132
-400.0%～400.0%(02-00(P.500)= 2/14/15/16/17)
02-37 P.547
Percentage corresponds to
terminal 3-5 maximum input
current/ voltage
-100.0%～100.0%
100.0% 132
-400.0%～400.0%(02-00(P.500)= 2/14/15/16/17)
02-38 P.526 Terminal HDI filter time 0～2000ms 10ms 133
02-39 P.524
Terminal HDI minimum input
frequency
0～100.00kHz 0.00kHz 133
02-40 P.525
Terminal HDI maximum input
frequency
0～100.00kHz
100.00
kHz
133
02-41 P.522
Percentage corresponds to
terminal HDI minimum input
frequency
-100.0%～100.0%
0.0% 133
-400.0%～400.0%(02-00(P.500)= 2/14/15/16/17)
02-42 P.523
Percentage corresponds to
terminal HDI maximum input
frequency
-100.0%～100.0%
100.0% 133
-400.0%～400.0%(02-00(P.500)= 2/14/15/16/17)
02-43 P.74
Terminal HDO clock
multiplier factor
0: Select FM function as the output function of terminal
HDO.
0 134
1～9000: factor for square-wave pulse output
frequency. Value in 02-43 (P.74) times output
frequency will be actual output pulse frequency.
02-44 P.543
Terminal FM output function
selection
0: Output frequency, use 02-51 (P.55) value as 100%.
0 135
1: Output current, use 02-52 (P.56) value as 100%.
2: Output DC bus voltage, use the
OV trigger voltage
as 100%.
3: Output inverter temperature accumulate rising rate,
use NTC trigger level as 100%.
4: Output inverter thermal relay accumulate rate, use
the digital thermal relay trigger level ( 06-00 ( P.9 ) ≠
0 ) or the thermal relay on IGBT trigger level ( 06-00
(P.9) = 0) as 100%.
5: Target frequency, use 02-51(P.55) value as 100%.
6: Fixed output, voltage or current output level can be
set by 02-54 (P.541)
7: Output voltage, use inverter rated voltage as 100%