Shihlin SA3 Series, Руководство пользователя

Страница: 355 / 423

Appendix 1 Parameter table
APPENDIX 353
Parameter
Number
Group Name Setting Range Default Page
P.803 07-18 CANopen control status
0: Boot not completed status
0 221
1: Forbidden operation state
2: Pre-excitation status
3: Excitation state
4: Allowed operating status
7: Quick action stop status
13: Trigger error action status
14: Error status
P.810 07-25 PU communication protocol selection
0: Modbus protocol
1 204
1: Shihlin protocol
2: PLC protocol (Effective when using Shihlin
built-in PLC)
P.811 07-26
PU inverter communication station
number
0~254
0 204
P.812 07-27 PU Serial communication baud rate
0：Baud rate 4800bps
1 205
1：Baud rate 9600bps
2：Baud rate 19200bps
3：Baud rate 38400bps
4：Baud rate 57600bps
5：Baud rate 115200bps
P.813 07-28 PU data length
0：8bit
0 205
1：7bit
P.814 07-29 PU stop bit
0：1bit
0 205
1：2bit
P.815 07-30 PU Parity check option
0：no parity check
0 205 1：odd check
2：even check
P.816 07-31 PU CR/LF selection
1: CR only
1 205
2: Both CR and LF
P.817 07-32 PU Modbus communication format
0：1、7、N、2 (Modbus, ASCII)
4 205
1：1、7、E、1 (Modbus, ASCII)
2：1、7、O、1 (Modbus, ASCII)
3：1、8、N、2 (Modbus, RTU)
4：1、8、E、1 (Modbus, RTU)
5：1、8、O、1 (Modbus, RTU)
P.818 07-33 PU Number of communication retries 0～10 1 205
P.819 07-34
PU communication interval allowed time
0~999.8s: Check communication timeout with
the set value
99999 205
99999: Off
P.820 07-35
PU communication error handling
0: Alarm and stop freely.
1 205
1: No alarm and continue running
P.826 07-41
Expansion communication card number
of communication retries
0~10 1 205
P.827 07-42
Expansion communication card
communication error handling
0: Alarm and idling and stopping
1 205
1: No alarm and continue running
P.828 07-43
Expansion communication card
communication interval allowed time
0~999.8s: Check communication timeout with
the set value
99999 205
99999: Off