Raven Envizio Pro, Инструкция по установке и эксплуатации

Страница: 49 / 287

Chapter 4
34 Envizio Pro™ and Envizio Pro II® Installation and Operation Manual
Additional Node Options
The following features or options may also be available via the CAN Diagnostics screen:
Select Control Channels
The Raven product controller node is capable of providing up to four product control channels on
an Envizio Pro control system. By default, the product controller will make two control channels
available to the field computer for controlling product application.
Select one of the product controller node channels and select the Select Channels icon (shown to
the left) to set the number of control channels available via the node.
Note:
The Select Channels icon will display the current number of channels which the node is providing
to the field computer. Each control channel must be configured separately via the Tools Menu.
Hardware Summary
Select a node from the list displayed on the CAN Diagnostics screen and touch this icon to view
detailed node hardware information if available. The hardware summary screen provides node
operating information that may be helpful when contacting technical support or while
troubleshooting CAN communication issues.
Note:
If the node is not capable of providing hardware information, the Hardware Summary screen will
display “N/A” for the unavailable diagnostic values.
Update CAN Nodes
Select a node from the list displayed on the CAN Diagnostics screen and touch this icon to update
the node firmware via the CANbus network using the field computer. Refer to Appendix E,
Updating CAN Nodes via the Envizio Pro , for additional assistance performing a node update
using the field computer.