Raven Envizio Pro, Инструкция по установке и эксплуатации

Страница: 232 / 287

APPENDIX
F
P/N 016-0171-493 Rev. I 217
Appendix F
Updating the
On-board DGPS
Receiver
Occasionally, updates for some Envizio Pro II on-board DGPS receivers may be made available for download
from the Applied Technology web site:
www.ravenhelp.com
Note:
The receiver update may be located under the additional software versions available on the
Envizio Pro II field computer software updates web page.
These updates are made available for field computers with the on-board receiver serial numbers starting with
“BZZ” or “BFN” and are not required unless a specific issue encountered during operation has been addressed
with the update. Please review the required components and read the firmware update procedure before
starting the process. Contact a local Raven dealer for more information or additional assistance with any part of
the firmware update.
Required Components
•
Envizio Pro field computer with an on-board receiver serial number starting with “BZZ” or “BFN.”
•
Home or office PC or laptop with Microsoft Windows
®
operating system and the WinLoad utility.
•
“Straight through” serial cable (optional)
•
USB to Serial adapter (optional)
•
Envizio Pro cable with ‘GPS Out’ connector
•
WinLoad and firmware update .hex file
CAUTION
Updating GPS firmware may result in the loss
of OmniSTAR correction services. Internal
receivers with a serial number beginning with
“BFN13” or lower are capable of OmniSTAR
correction services with NovAtel firmware
“OEM060220SN0009” or lower. Updating the
GPS engine firmware will result in the loss of
OmniSTAR subscription services.