Raven Envizio Pro, Инструкция по установке и эксплуатации

Страница: 17 / 287

Chapter 1
2 Envizio Pro™ and Envizio Pro II® Installation and Operation Manual
Hydraulic Safety
•
Raven Industries recommends that appropriate protective equipment be worn at all times when working on
any hydraulic system.
•
Never attempt to open or work on a hydraulic system with the equipment running. Care should always be
taken when opening a system that has been previously pressurized.
•
Exercise caution when disconnecting the hydraulic hoses or purging is required, be aware that the hydraulic
fluid may be extremely hot and under high pressure.
•
Any work performed on a hydraulic system must be done in accordance with the machine manufacturer’s
approved maintenance instructions.
•
When installing hydraulics or performing diagnostics, maintenance or routine service, ensure that
precautions are taken to prevent any foreign material or contaminants from being introduced into the
machine’s hydraulic system. Objects or materials that are able to bypass the machine’s hydraulic filtration
system will reduce performance and possibly damage the hydraulic valves.
Electrical Safety
•
Always verify that the power leads are connected to the correct polarity as marked. Reversing the power
leads could cause severe damage to the equipment.
•
Ensure that the power cable is the last cable to be connected.
•
Always remove the power connections for the field computer and any control nodes from the vehicle battery
before jump starting or welding on any component of the vehicle. Jump starting or welding on the equipment
will damage the field computer and nodes.
CAUTION