Raven Envizio Pro, Инструкция по установке и эксплуатации

Страница: 154 / 287

P/N 016-0171-493 Rev. I 139
Tools Menu
7
8.
Touch the Accept icon in the lower, right corner of the on-screen keyboard to confirm the activation key.
9.
Touch the ‘Next’ icon on the right side of the screen to activate the special feature.
If the key has been entered correctly, the activated feature will be displayed on-screen.
If the activation key does not activate the feature, verify that the key has been entered correctly.
To Authorize Raven Control Node Features.
Note:
A Raven node with optional features must be connected to the field computer to enable additional
features.
1.
Obtain an registration code from a local Raven dealer.
2.
Visit the Raven web site below and fill out the Activation Key Request form with the registration code
received from the Raven dealer.
www.ravenhelp.com
3.
Submit the request form to receive the activation key used to unlock the special feature on the Envizio Pro
field computer.
4.
On the Envizio Pro, touch the Tools Menu icon on the Home screen.
5.
Select the Updates icon from the Computer menu.
6.
Touch the Special Features Registration button to access the Special Registration Features screen.
7.
Touch the Enter Activation Key button and use the on-screen keyboard to enter the activation key from the
Raven web site.
8.
Touch the Accept icon in the lower, right corner of the on-screen keyboard to confirm the authorization
code. If the key has been entered correctly, the field computer will display a prompt confirming the code has
been accepted. The node activation key will not be displayed on the Special Features Registration screen.
Check the CAN Diagnostics screen or test the control system to verify that the special feature(s) purchased
are accessible.
To Authorize Internal DGPS Receiver Features.
1.
From the Envizio Pro II home screen, touch the Tools Menu (blue) button and select the Source icon from
the GPS menu.
2.
On the GPS Source screen, write down the current source setting before selecting the Internal GPS
Receiver option.
3.
Touch the Accept icon to return to the main Tools Menu display.
4.
Select the Output icon from the GPS menu.
5.
On the GPS Output screen, write down the current NMEA message rates before setting all NMEA
messages to zero.
6.
Touch the Accept icon to return to the main Tools Menu display.
7.
Select the Updates icon from the Computer menu.
8.
Touch the Special Features Registration button to access the Special Registration Features screen.
9.
Touch the Enter Activation Key button and use the on-screen keyboard to enter the activation key from the
Raven web site.
10.
Touch the Accept icon in the lower, right corner of the on-screen keyboard to confirm the authorization
code.
11.
Touch the Next icon. If the key has been entered correctly, the field computer will display a prompt
confirming the code has been accepted. Verify that the feature is available in the differential screens. New
GPS correction features may take a couple minutes to display properly. If the feature is still not available
after 5 minutes, restart the field computer and reattempt to access the new feature. Contact a local Raven
dealer if additional assistance is still required.