Raven Envizio Pro, Инструкция по установке и эксплуатации

Страница: 227 / 287

Appendix D
212 Envizio Pro™ and Envizio Pro II® Installation and Operation Manual
Connecting the Weather Station
The weather station may connect to the field computer via either of the following connectors:
•
“COM2” or “Console” connector on the main interface or chassis cabling.
•
“COM3” or “Light Bar” connector on the auxiliary interface or chassis cabling.
Note:
If the field computer is connected to an external Raven serial controller, the weather station must
be connected to ‘COM 3/Light bar’ on the auxiliary interface or chassis cabling.
Weather Station Activation Key
In order to use the weather station with the Envizio Pro, the weather module authorization code
(P/N 077-0180-030) must be purchased from a Raven dealer. Once the code has been purchased and
registered on-line, the activation key must be entered into the Envizio Pro.
Note:
Refer to the Special Features Registration section on page 138 for additional assistance with
obtaining the activation key and entering the authorization code.
Weather Station Configuration
To view weather information collected by the weather station:
1.
Touch the Tools Menu icon on the Home screen.
2.
Select the Weather Station icon from the Computer menu to display the Weather Station screen.
Note:
The upper portion of the Weather Station screen displays the current weather conditions collected
by the weather station. The snapshot button will only display during an active job.
3.
The default baud rate for communication with the weather station is 4800 and should generally not need to
be changed.
4.
Ensure that the Enable Logging option is enabled to record weather information during an active job and
provide this information on the completed application report file. If weather data is not needed, leave this
option un-checked to help conserve memory on the field computer.