Raven Envizio Pro, Инструкция по установке и эксплуатации

Страница: 233 / 287

Appendix F
218 Envizio Pro™ and Envizio Pro II® Installation and Operation Manual
Receiver Information
Perform the following steps to access the information from the GPS receiver required for unlocking additional
features of the on-board GPS receiver:
1.
Touch the GPS Status icon in the upper, left corner of the Home screen.
2.
Touch the Receiver Information icon along the right side of the GPS Health screen.
3.
Copy the displayed receiver information and provide this information to a local Raven dealer when acquiring
the unlock code for additional GPS services or features.
GS Satellite Subscription
Note:
For best service, verify that the Envizio Pro software is 3.7.1 or newer and the GPS firmware
version is 6.04 or newer before purchasing a GS Satellite subscription. Ensure the GS activation
code is entered before attempting to purchase the GS Satellite subscription. Refer to the Special
Features Registration section on page 138 for assistance with entering an activation code.
1.
Touch the Tools Menu icon on the Home screen and select the GPS menu.
2.
Touch the Differential icon and select GS Satellite to display the GS Satellite information.
3.
Copy the PAC Code displayed.
4.
Visit the Slingshot Store at the web address below and purchase the desired GS Satellite subscription.
https://ravenslingshot.com/store/
Updating the On-Board DGPS Receiver
1.
Power up the Envizio Pro II field computer.
2.
Check the cable connections on the back of the field computer and trace the cable connected to the
auxiliary interface connector.
FIGURE 1.
Envizio Pro II Rear Panel Features and Connectors
Note:
If there is no cable connected to the auxiliary interface connector, contact a local Raven dealer for
more information and assistance.
3.
Locate the connector labeled “GPS Out” on the cable connected to the auxiliary interface connector.
USB Port
Ethernet Port
Main Interface
Connector
Auxiliary Interface
Connector
Antenna Port