Raven Envizio Pro, Инструкция по установке и эксплуатации

Страница: 180 / 287

9
P/N 016-0171-493 Rev. I 165
Using AccuBoom™
If a CAN switch box or Switch Pro is not installed with the control system, the on-screen switch box may be
used to enable the override feature. To enable the override during an AccuBoom enabled job using the on-
screen switch box:
1.
Touch the on-screen switch box icon displayed in the lower, left corner of the Guidance screen.
The in job AccuBoom screen will be displayed.
2.
Touch the Override button. AccuBoom section control will toggle all sections on for the number of seconds
configured for the override feature.
Aggressiveness
The aggressiveness setting adjusts the AccuBoom feature response for large implements or aggressive
driving styles.
The look-ahead values set the amount of time ahead of
the vehicle (based on vehicle speed) which the field
computer will scan for zone boundaries or unapplied
areas when turning sections on or off. By default,
AccuBoom overrides any additional zone boundaries
detected until the look-ahead time has passed. For
example, if the turn-on look-ahead value is set to 5
seconds and AccuBoom detects an unapplied area 5
seconds ahead of a boom section, AccuBoom toggles
that section on and will ignore subsequent commands to
turn that section off until the section has entered the
unapplied area.
For sections at the end of larger booms, or where sharp
turns or aggressive maneuvering is necessary, this
override may cause unexpected skips in coverage. The aggressiveness factor uses the user defined look-
ahead values to adjust AccuBoom response for these driving styles and/or field areas requiring aggressive
maneuvering when crossing zones. Higher aggressiveness settings will increase the override time for
subsequent AccuBoom section control commands. To set the AccuBoom aggressiveness from the main
screen:
1.
Touch the Tools Menu and select the AccuBoom icon located within the System menu.
2.
Touch the Aggressiveness button.
3.
Select the desired aggressiveness setting to match the operator driving style or requirements.
4.
Touch the Accept icon to save the aggressiveness factor setting and return to the AccuBoom Configuration
screen.
Override