Raven Envizio Pro, Инструкция по установке и эксплуатации

Страница: 90 / 287

6
P/N 016-0171-493 Rev. I 75
Basic Operation
Nudge Feature
The Nudge Feature allows the operator to fine tune the displayed path for actual field conditions. For example,
if the displayed path guides the vehicle too close to crop rows, nudge the line to the left or right to adjust the
path and guide the vehicle away from rows.
Note:
The Nudge Feature is only available with A-B guidance paths (Straight Line, Pivot, Fixed Contour).
The Nudge Feature works especially well with the Raven SmarTrax assisted steering systems. Contact a local
Raven dealer for more information about these systems.
On-Screen Nudge Enabled
To enable and use the on-screen nudge feature to adjust a displayed guidance path:
1.
Begin a job and set A and B points for a guidance path using the Straight Line, Fixed Contour or Pivot
patterns.
2.
Select the Menu icon in the lower, right corner of the display and select the Edit Nudge icon to display the In
Job Nudge Settings screen.
Note:
Touch the Reset Nudge button at the bottom of the Nudge Settings screen to reset any
adjustments to the path displayed on the Guidance screen.
3.
On the Nudge Settings screen, select the ‘Enabled’ radio button to display the nudge control icons on the
Guidance screen during field operations.
4.
Touch the Nudge 1 and Nudge 2 buttons and use the on-screen keypad to enter the desired values for each
nudge setting. Select the desired units for the entered nudge value and touch the Accept icon to return to
the Nudge Settings screen.
5.
Select either the ‘Nudge 1’ or ‘Nudge 2’ radio button to select the active nudge applied when the on-screen
nudge controls are used. During field operations, the active nudge radio buttons may be used to quickly
select one of the pre-configured nudge values.