Raven Envizio Pro, Инструкция по установке и эксплуатации

Страница: 240 / 287

P/N 016-0171-493 Rev. I 225
Blockage Monitoring Sensors
Configure Sensor Loops
To setup the blockage monitoring sensor loops:
1.
Touch the Section Assignments button. The Sensor Section Setup screen for the first implement section will
be displayed.
2.
Touch the Edit button corresponding to loop 1 and loop 2 and use the on-screen keypad to configure the
number of sensors associated with the first implement section. Touch the Next icon to advance to the next
implement section.
Note:
Only enter values for the number of configured sections on the drill. Leave the value at zero for
any unused sections.
Do not count any sensor more than once. If a sensor is used for multiple sections, count the
sensor for the section most frequently used and do not count the sensor for the remaining
section(s).
3.
After the sensor loops are configured for each implement section, touch the Next icon to display the Sensor
Summary screen. Review the configured sensors per section in each loop and touch the Accept icon to
store the displayed settings. To reconfigure any of the sections, touch the Previous icon to return to the
section setup screens.