Raven Envizio Pro, Инструкция по установке и эксплуатации

Страница: 20 / 287

2
P/N 016-0171-493 Rev. I 5
Introduction
Serial Rate Control
The Envizio Pro system may be used to monitor and map applications controlled by another Raven serial
console, such as the Raven SCS 440 or 460 consoles, via a serial connection. Variable rate capabilities of the
field computer may also be utilized with a Raven serial console to automatically adjust application rates based
upon a prescription map loaded on the Envizio Pro series field computer.
A real-time, as-applied map is displayed on-screen while application information is logged and saved by the
field computer. This job information may then be transferred to a USB flash drive, copied to a home or office
PC and used to create printed reports and coverage maps.
Note:
The Envizio Pro is compatible with the Raven SwitchPro™ switch box and may be used to replace
an existing serial rate controller with a Raven CANbus control system using the existing control
hardware and cabling.
On-Screen Guidance
The Envizio Pro field computers provide on-screen guidance in the form of a Course Direction Indicator (CDI)
and on-screen light bar. The on-screen navigation features Last Pass, Pivot, Fixed Contour and Straight Line
guidance patterns. In addition, the field computer can output GPS information and simulated radar speed to an
external Raven light bar. See Chapter 5,
Startup, Initial Setup, and Setup Wizards , for more information
regarding guidance patterns and the Guidance screen.
Internal DGPS Receiver Options
Both the Envizio Pro and Envizio Pro II offer options for an internal Differential GPS (DGPS) receiver to reduce
cab clutter and simplify transfer of the control system between vehicles for use during various operations such
as planting, spraying and harvesting. A range of receiver options is available to fit into almost any existing
system or to expand DGPS capabilities as field operations grow and change.
Note:
Field computers without the internal DGPS receiver require an external DGPS receiver for
operation.
The internal receiver in either the Envizio Pro or Envizio Pro II may be disabled to allow an
optional external receiver, such as a Raven Invicta or Phoenix series or virtually any new or
existing DGPS receiver, to be connected to the system. Refer to Chapter 7, Tools Menu for details
on configuring the field computer to operate with external DGPS receivers and light bars.
Contact a local Raven dealer for more information about additional options or features available
with the Envizio Pro or Envizio Pro II internal receiver.