Raven Envizio Pro, Инструкция по установке и эксплуатации

Страница: 155 / 287

Chapter 7
140 Envizio Pro™ and Envizio Pro II® Installation and Operation Manual
Demo Mode
Touch the Demo icon in the upper-right corner of the Updates screen to toggle the demonstration mode. This
mode enables a GPS simulation. The field computer will create a coverage map based on the simulated GPS
position.
To start the demonstration mode:
Touch the Start Demo icon to toggle the demo mode on. The field computer must be restarted
before the demonstration mode will be activated.
Shutdown and power off the console. Wait a few seconds and turn the console power back on.
To end demo mode, return to the Updates screen and select the Stop Demo icon to toggle demo
mode off.
Be sure to restart the field computer to restore the Envizio Pro to normal operation.
File Maintenance
To transfer files to or from the field computer, select the File Maintenance icon in the Computer menu. The
following File Maintenance may be conducted directly from the field computer:
•
Setup required file structure for use with the field computer on the USB drive
•
Copy files to USB drive
•
Copy files from USB drive
•
Delete files from internal memory
Raven recommends performing File Maintenance at least once a week and storing or backing up these files on
a home or office PC. See Chapter 8,
Software Updates and File Maintenance for details on using the File
Maintenance feature.
Note:
Depending upon the size of the completed job(s), file maintenance may take several minutes to
complete.
When interfacing with a planter control or yield monitor system, a typical job of 200 acres should
take less than 5 minutes. Larger fields and coverage maps with several sections (e.g. MultiRow or
Individual Row Control) could take significantly longer. Check the File Maintenance screen
available memory display periodically and perform file maintenance as necessary. Refer to
Chapter 8, Software Updates and File Maintenance, for more information.
Wireless File Transfer
If a Slingshot
®
Field Hub is connected to the field computer, job files may be transferred to a home or office
computer automatically at the end of each job. Refer to Appendix C, Wireless Communications & Remote
Service , for more information on setting up and using Slingshot and the wireless file manager to manage job
file transfers.
Web
If the required components are connected to the ethernet port on the back of the field computer, pressing the
Web button will allow the operator to access the world wide web via the field computer touch screen. Refer to
the Field Hub Quick Start Guide for set up and wireless navigation instructions.