Raven Envizio Pro, Инструкция по установке и эксплуатации

Страница: 88 / 287

6
P/N 016-0171-493 Rev. I 73
Basic Operation
Switch to the Bird’s Eye view to change to a view from above the vehicle position. This view will
display all of the same guidance features and tools as the down field view.
A-B Path Tools
The following tools and features may be found in the Menu when the Straight Line, Fixed Contour, or Pivot
guidance patterns are active.
Note:
The following icons may not appear in the Menu at the same time. Tools may only be available
before or after a guidance line has been set.
Loading an A-B Line
If an A-B Line has been saved on the field computer, touch the Load A-B Line icon to load the
saved line into the current job. This icon will not appear if an A-B Line has already been set. Reset
the line to access the Load A-B Line tool.
Note:
The A-B Line must be stored on the field computer internal memory to be able to access and load
the guidance path. Be sure to transfer all necessary files to the field computer before beginning a
job.
Names or descriptions of A-B Lines stored on the field computer cannot begin with a space.
Setting A-B Points
To create a new A-B line, the operator must set A and B points. The following icons and tools may be used to
set a new A-B line.
Touching the Set A icon will place the first, or A, point of the path at the vehicle’s current location.
Regardless of where the vehicle moves from this point, the field computer will use the selected
pattern to connect this point with the next set point. After the Set A icon is selected, the Set B icon
will appear.
Touch the Set B icon to place the second, or B, point of the guidance path. Once the B point has
been set, the field computer will use the selected pattern to create the guidance path displayed on
the Guidance screen.