Raven Envizio Pro, Инструкция по установке и эксплуатации

Страница: 128 / 287

P/N 016-0171-493 Rev. I 113
Tools Menu
7
Prescription (Rx) Default Rate. Set the Rx Default Rate at the Target rate for areas without Prescription
information. The field computer will apply the default rate within any areas of a prescription map without a rate.
Product control in Zero Rate zones will remain at zero. The Default Rate only affects areas where prescription
rate information has not been entered.
AccuBoom
If the optional AccuBoom, automatic boom section control, feature is detected by the field computer, the
AccuBoom button will be displayed on the Product Control Configuration screen.
Settings for the optional AccuBoom, automatic boom section control, feature are available for each product
controlled with the field computer. Refer to the
AccuBoom™ Setup section on page 164 for more information
on configuring the AccuBoom feature for liquid or granular product application control.
Note:
Refer to the AccuRow or OmniRow Calibration and Operation Manual for additional information on
configuring the optional AccuRow, automatic planter section control, feature when controlling
planter systems.
Volume and Area Settings
The volume/area Settings screen allows the operator to program the tank or bin volume for the machine, the
field volume, total volume, field area and total area.
Tank Volume or Bin Level
The tank or bin indicator on the Guidance screen displays a tally of product remaining based upon this value.
The tank or bin volume is the volume of product in, not the capacity of, the tank or bin. Set this value to the
normal volume of product in a full tank or bin. This setting also determines the value of the ‘Reset Tank or Bin
Volume’ button.
Refer to the Entering Tank Volume or Bin Level section on page 202 for information on setting the tank volume
or bin level.