Raven Envizio Pro, Инструкция по установке и эксплуатации

Страница: 257 / 287

Appendix I
242 Envizio Pro™ and Envizio Pro II® Installation and Operation Manual
4.
To program the cal weight value, press the Right key to move the cursor past the last decimal place in the
cal weight value and press the Send key.
The remote tank console will send the entered cal weight value to the appropriate control node and will
return to the bin calibration screen.
5.
Press the Exit key to return to the bin selection screen.
Using the Tank Console To Adjust Settings
The following settings may be entered using the remote tank console. Settings will be stored in the appropriate
nodes on the OmniSeed system and will be registered by the field computer when starting OmniSeed
application for seeding operations.
To adjust settings for a specific bin or product:
1.
With the remote tank console powered up, use the Next and Prev keys to select the desired bin and press
the Enter key.
2.
Press the Setup key to display the current settings for the selected bin.
3.
The following settings will be available on the first settings screen:
Note:
Use the Next or Prev keys to move the cursor between the screen options. Pressing the Prev key
on the decimal shift option will return to the bin calibration screen. Press the
Next key on the cal
weight option to advance to the second settings screen.
Decimal Shift. Press the Toggle key on the decimal shift option to turn the decimal shift feature on or off.
Enable the decimal shift feature to increase the system accuracy for low application rates. In the standard
mode, the remote tank console and field computer will display values to one decimal place. With the
Decimal Shift feature enabled, values will be displayed to two decimal places.
Note:
When the field computer is initialized, all of the calibration values will need to be verified after the
Decimal Shift feature is either enabled or disabled. Change settings as necessary.
Send Key