Raven Envizio Pro, Инструкция по установке и эксплуатации

Страница: 136 / 287

P/N 016-0171-493 Rev. I 121
Tools Menu
7
Reverse Sensing
Select this option to allow the field computer to automatically detect when the vehicle is traveling in reverse.
When reverse speed is detected, the field computer will keep the previous orientation of vehicle indicator while
updating the vehicle position.
Note:
If this feature is disabled, the guidance display will assume all vehicle motion is in the forward
direction.
Touch the ‘Reverse Sensing’ option at the bottom of the GPS Menu screen to toggle the reverse sensing
feature. It is recommended to enable this feature if the field computer must accurately map application or field
coverage while the vehicle is reversing (i.e. backing into corners).
Note:
When the reverse sensing feature is enabled, the field computer may occasionally require the
operator to manually override the current direction of travel during field operations. Review the
GPS Health section on page 122 and the Direction of Travel Indicator section on page 124 before
starting a job to ensure that the operator can toggle the direction of travel if necessary.
The reverse sensing feature is not displayed if a SmarTrax terrain compensation node is
connected to the field computer.
The direction of travel icon (shown to the right) will be displayed on the Guidance screen any time
the field computer detects that the vehicle is traveling in reverse. Touch the reverse direction icon
to manually toggle the direction of travel displayed on the Guidance screen.
If the reverse direction icon is not displayed on the Guidance screen, touch the GPS Status
Indicator and touch the direction of travel icon along the right side of the screen to manually toggle the
displayed vehicle course.