Raven Envizio Pro, Инструкция по установке и эксплуатации

Страница: 33 / 287

Chapter 3
18 Envizio Pro™ and Envizio Pro II® Installation and Operation Manual
Mounting the Field Computer
Refer to the following requirements when selecting a mounting location for the Envizio Pro field computer:
•
Mount the field computer inside of the machine cabin or driver compartment within easy reach of the driver
or operator. The field computer is not weatherproof.
•
Securely fasten the RAM mounting arm to a suitable, flat surface. Once mounted, the RAM mounting arm
must provide a stable base for the console and should not impede normal machine operation.
•
Mount the field computer in a location where it will not be jarred during normal equipment operation. Keep
the computer clear of moving elements within the machine’s cab.
•
Route all cables to avoid tripping hazards and protect the cable from kinking or breaking during operation.
To mount the Envizio Pro or Envizio Pro II field computer:
Note:
If the CAN Switch Box will be installed with the Envizio Pro field computers, use the mounting
hardware provided with the CAN Switch Box. Refer to the CAN Switch Box Installation and
Operation Guide for mounting instructions.
1.
Mount the circular base of the RAM socket arm (P/N 117-0171-132) securely within the cab of the vehicle.
2.
Using the four mounting posts and supplied hardware, secure the field computer to the square plate of the
RAM mounting arm.
FIGURE 2.
Envizio Pro and Envizio Pro II Rear Panel
3.
Insert the ball mounting posts into the socket mounting arms and tighten the hand screw to secure the field
computer at the desired mounting location.
Mounting Posts
Main Interface
Connector
Auxiliary Interface
Connector